MEM TQA-4050 pneumatic double station heat press

The design of the MEM double station presses combines a heavy-duty solid industrial grade pressing framework with high quality electric components. This provides the operator with the best possible features and equipment needed for today's various heat transfer applications.

Using the MEM TQA-4050 double station heat press, all common heat transfer processes (flock,flex, sublimation, transfer, Inkjet--flex etc.) can be conducted professionally and with highest productivity. The desired settings can be set easily with the temperature controller. The pneumatic pressure can be regulated smoothly with the air reducing valve. With the restriction valve on the solenoid valve, the press and lift speed could be adjusted.

Short overview MEM TQA-4050 heat press

● Pneumatic double station transfer press for medium and large batches.

● Pressure balancing system on heat plate and bottom plate.

● Operates in semi-automatic or manual modes.

● Adjustable air pressure by air reducing valve with water separator.

● Two-hand operation for safety use.

● CE certificated and RoHS certificated.

● Lifetime factory on-line service.

Please read these instructions and safety precautions carefully before using your press for the first time!

● Never reach into the heat press with your hands when it is connected to the power supply, particularly when it is switched on and heated up – danger of severe burns!

● Do not open the cover or attempt to modify the machine yourself without instruction.

● In case you are requested by the MEM customer support to open the heating plate cover,please make sure you are wearing respiratory protection and only touch the contained insulation wool with gloves. Any disposal of the wool must be contained in a closed bag.

● Ensure that liquids and metal objects do not get into the inside of the heat press.

● Ensure that the power socket used is grounded. Note that it is only permissible to operate a heat press from a power socket protected by a ground fault protection switch.

● Disconnect machine from power outlet when not in use!

● Never operate the heat press within the reach of children and never leave the machine unsupervised when switched on.

● Ensure that the machine is used only in dry rooms.

● Pay attention that the used compressor is attuned to the air consumption and the pressure

If you cannot observe one or more of the safety precautions above, or if you are not sure whether all points are satisfied, please contact our Technical Support Department.

a.Power switch

b.Two hand control press buttons (works on manual mode)

c.Temperature controller

d.Manual/automatic switch button

e.Emergency stop button

f.Handle

g.Air reducing valve

h.Heat plate

i.Bottom platen

j.Bottom pressure balancing system

k.Stand

l.Height adjustable foot